SISP03 Silicon cables: possibly the softest cables you can buy, the same cables are used on our best-selling V12 motor: you get a couple composed of black and red cables, 12cm long, with brass terminations to plug them in your pick-up
SISP04 Brass cable connectors: 5.5 mm long, 1.5 mm diameter brass eyelets, pack of 10 pieces
SISP05 Copper braid, the thinnest (0.3 mm) yet strong braid, when keeping your nose down matters! We are quite proud of this product, and we have worked hard on it, to provide you what we believe is the best copper braid for 1/32 plastic chassis cars
SICN01 : Neodimium magnet for english cars. Dimension is directly compatible with english models. An english GT1 Porsche with this magnet is a real rocket...
SICN02 : Neodimium magnet for english cars, 'C' shaped: higher speed on straights and same ground effect on turns. The lighter traction on straight allows for thicker magnet sides without harming the motor.
SLOT IT BOXER
The Boxer is a drop-in upgrade for NC type motors. It is available either as Boxer-24: 24000 RPM - 135 g*cm @12V (29600 RPM - 205 g*cm @14.8V) Boxer-17: 17000 RPM - 221 g*cm @12V (21000 RPM - 336 g*cm @14.8V) The 24000 RPM version is the Slot.it motor of choice on wooden tracks.
V12/2 MOTOR
The V12/2b is an advanced technology competition motor family for 'Euro 1/32' slot cars, which means these motors can be used in most modern slot cars. The V12 motor can be choosen either in 29000, 25000, 23000 RPM configuration (all data @12V unless specified differently).
The same features, named 'heatsink technology', are available across the whole V12 range: resin coated armature stack, high temperature resistant wire, large diameter professional commutator and cooling holes. The V12 motor is an instant drop-in upgrade for most cars, thanks to the double shaft; several versions are available with the proper pinion mounted according to what car the upgrade is planned for, but any V12 motor can be changed into a different configuration just by changing pinion side and/or dimension: for example, a motor in a Scalextric configuration can be changed to an inline standard Slot.it Audi just by changing the pinion side. A special version of the motors is available, with a snap-in adaptor, as an upgrade for RX motors.
V12/2 23000 RPM @12V - 83g*cm - black
Recommended on twisty circuits for its driveability and smooth behaviour.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
