Gradient fill Gradient fill
online catalogue
Site MapContact UsTerms & Conds

spacer image spacer image

€ : £ rate 1.1. £2 surcharge on orders less than £5. We will always try and better a competitive price.

JP SLOT

online catalogue |  JP SLOT

JPSLOT review

JPSLOT review

BTP005E/32
Super Trencillas Carries far Racing (Soft)
Manufactured in 0.05 mm wire, these braids are specially designed for short tracks and races. Due to their great flexibility and braiding, their optimum working conditions are on very clean tracks.
NOTE: The ideal braid for wooden tracks with iron braids. They enable total penetration of the guide in the lane, allowing the car nose to stay low. Extremely soft but also incredibly hard-wearing, they can be used for fairly short endurance races where not much dirt is accumulated on the track.

BTP007E/32
Super Trencillas Carries far Racing (Medium Hard)
Manufactured in 0.07 mm wire, medium hard braids are suitable for more ordinary use both on the track and for asphalt rally, and when the cleanliness conditions are not so strict. They are soft but also very hard-wearing, and can be used for endurance races and races requiring a good electrical response.
NOTE: The ideal braid for all types of tracks with low-profile cars.

BTP010E/32
Super Trencillas Carries far Wide Double Racing (Maximum Hardness)
Manufactured in 0.10 mm wire, these braids are designed for dirt rally tracks and tracks requiring extreme hardness and durability conditions. For endurance, speed and rally races using flour or sawdust; in the latter case they act as genuine “brushes” for the lanes, cleaning them for the following round.
NOTE: The ideal braid for rally or dirt rally tracks and 4x4 cars and lorries.

BTP015E/24
Braid for 1/24 Plafit cars
Braid for 1/24 Plafit cars, with great wear resistance and hardness and designed by the Denia Club Marina Alta people. Special braid for endurance racing.

Oxygen-free copper braid for wooden tracks, providing greater speed for cars of all scales and preventing magnetism, giving priority to the driver’s skill.

Contact terminals manufactured in copper instead of the traditional brass. They provide excellent contact, favouring electrical conduction. The combination of our braid, cable and terminal products provides a considerable improvement in electrical performance for top-level competition and for home users who are looking for excellent features.

JP1005E20U braid

JP1005E20U braid

Ref: JP1005E20U


Price: £4.00 / €4.40

Quantity:

LINK

BTCu4/32   copper eyelets

BTCu4/32 copper eyelets

Ref: JPSLOT BTCu4/32


Price: £4.00 / €4.40

Quantity:

x20

JPSlot 1005E/32

JPSlot 1005E/32

Ref: JPSlot 1005E/32


Price: £4.20 / €4.62

Quantity:

(JP Slot 005E/32) Oxygen Free Braid. Soft, Ideal for Drift Cars (50cm)

JPSlot 1007E/32

JPSlot 1007E/32

Ref: JPSlot 1007E/32


Price: £3.90 / €4.29

Quantity:

Medium Hard
OXGEN FREE- Manufactured in 0.07 mm wire, medium hard braids are suitable for more ordinary use both on the track and for asphalt rally, and when the cleanliness conditions are not so strict. They are soft but also very hard-wearing, and can be used for endurance races and races requiring a good electrical response.

JP Slot 010E

JP Slot 010E

Ref: JPSlot 010E


Price: £4.50 / €4.95

Quantity:

(JP Slot 010E) Oxygen Free Braid Hard (50cm)

JPSlot 210VE20U

JPSlot 210VE20U

Ref: JPSlot 210VE20


Price: £4.25 / €4.68

Quantity:

1.5mm

JPSlot 211NE20U

JPSlot 211NE20U

Ref: JPSLOT 211NE20U


Price: £4.15 / €4.57

Quantity:

1.00 mm

JP Slot Naranja- Oxygen Free Braid Pack

JP Slot Naranja- Oxygen Free Braid Pack

Ref: JPSlotNaranja


Price: £6.00 / €6.60

Quantity:

JP Slot Verde Oxygen Free Braid Pack

JP Slot Verde Oxygen Free Braid Pack

Ref: JPSlotVerde


Price: £6.00 / €6.60

Quantity:

(JP Slot Verde) Oxygen Free Braid Pack

online catalogue |  JP SLOT

Slot32 the best choice for all your slot cars requirements

spacer image